#$language = "VBScript"
#$interface = "1.0"
crt.Screen.Synchronous = True
' This automatically generated script may need to be
' edited in order to work correctly.
Sub Main
crt.Sleep 3000
crt.Screen.Send " screen-length disable" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis clock" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis device manuinfo" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis version" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis device" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis cpu " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis memory" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis environment" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis fan" & chr(13) & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis power" & chr(13) & chr(13) & chr(13) 
crt.Screen.Send " dis logbuffer " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis int bri " & chr(13) & chr(13) & chr(13) 
crt.Screen.Send " dis ip int bri " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " display ip routing-table" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis vlan" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis arp" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis mac-address" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis curr" & chr(13)
End Sub

' 命令解析：（双引号的命令可以替换）  
' H3C可以输入 screen-length disable 多行显示一次显示完，不用按空格继续下一页的操作！
' 
' screen-length disable             设置命令不分页显示
' dis clock                         显示当前时间
' dis device manuinfo               查看设备序列号
' dis version                       查看设备版本
' dis device                        查看设备信息
' dis cpu                           查看CPU利用率
' dis memory                        查看内存利用率       
' dis environment                   查看设备温度
' dis fan                           查看风扇状态
' dis power                         查看电源状态
' dis logbuffer                     查看系统和告警日志
' dis int bri                       查看物理端口状态
' dis ip int bri                    查看三层接口状态
' display ip routing-table          查看路由表
' dis vlan                          查看vlan
' dis arp                           查看ARP表
' dis mac-address                   查看MAC表
' dis curr                          查看当前配置
  

#$language = "VBScript"
#$interface = "1.0"
crt.Screen.Synchronous = True
' This automatically generated script may need to be
' edited in order to work correctly.
Sub Main
crt.Sleep 3000
crt.Screen.Send " dis clock" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis device manuinfo" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis version" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis device" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis cpu-usage " & chr(13) & chr(13) & chr(13)
crt.Screen.Send "dis memory " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis environment" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis fan" & chr(13) & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis power" & chr(13) & chr(13) & chr(13)  
crt.Screen.Send " dis logbuffer " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis trapbuffer " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis int bri " & chr(13) & chr(13) & chr(13) 
crt.Screen.Send " dis ip int bri " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " display ip routing-table" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis vlan" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis arp" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis mac-address" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " dis curr" & chr(13)
End Sub


' 命令解析：（双引号的命令可以替换） 
' 记得进入vty 和console口 配置 screen-length 0 变为不分页显示！不然信息太多显示不齐，命令容易出错！
' dis clock				显示当前时间
' dis device manuinfo	查看设备序列号（有些版本不支持）
' dis version			查看设备版本
' dis device			查看设备信息
' dis cpu-usage			查看CPU利用率
' dis memory-usage		查看内存利用率				
' dis environment		查看设备温度
' dis fan			查看风扇状态
' dis power			查看电源状态
' dis logbuffer			查看系统日志
' dis trapbuffer		查看告警日志
' dis int bri			查看物理端口状态
' dis ip int bri		查看三层接口状态
' display ip routing-table      查看路由表
' dis vlan                      查看vlan
' dis arp                       查看ARP表
' dis mac-address               查看MAC表
' dis curr                      查看当前配置
  

#$language = "VBScript"
#$interface = "1.0"
crt.Screen.Synchronous = True
' This automatically generated script may need to be
' edited in order to work correctly.
Sub Main
crt.Sleep 3000
crt.Screen.Send " enable" & chr(13)
crt.Screen.Send " terminal length 0" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show clock" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show version" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show processes cpu " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show processes mem" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show environment all" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show logging " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show interfaces status " & chr(13) & chr(13) & chr(13) 
crt.Screen.Send " show ip interface brief" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show ip route" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show vlan" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show arp" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show mac address-table" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " enable" & chr(13)
crt.Screen.Send " show run" & chr(13)
End Sub

' 命令解析：
' enable			先进入特权模式
' terminal length 0		设置命令不分页显示
' show clock                	显示当前时间
' show version			查看设备版本（有些型号可以显示序列号）
' show processes cpu		查看CPU利用率
' show processes mem		查看内存利用率				
' show environment all		查看设备温度、风扇、电源
' show logging 			查看系统和告警日志（在#模式下查看）
' show interfaces status  	查看物理端口状态
' show ip interface brief	查看接口IP的UP状态
' show ip route			查看路由表
' show vlan			查看vlan
' show arp			查看ARP表
' show mac address-table	查看MAC表
' show run                      查看当前配置（在#模式下查看）
  

#$language = "VBScript"
#$interface = "1.0"
crt.Screen.Synchronous = True
' This automatically generated script may need to be
' edited in order to work correctly.
Sub Main
crt.Sleep 3000
crt.Screen.Send " terminal length 0" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show clock" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show manuinfo" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show version" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show cpu " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show memory" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show temperature" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show fan" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show power" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show logging " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show interfaces status " & chr(13) & chr(13) & chr(13) 
crt.Screen.Send " show ip interface brief" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show ip route" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show vlan" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show arp" & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show mac " & chr(13) & chr(13) & chr(13)
crt.Screen.Send " show run" & chr(13)
End Sub

' 命令解析：			锐捷要先进入特权模式#下才能查
' enable			先进入特权模式，锐捷默认密码为 ruijie
' terminal length 0		设置命令不分页显示
' show clock          		显示当前时间
' show manuinfo      		显示序列号（在#模式下查看）
' show version			查看设备版本
' show cpu			查看CPU利用率（在#模式下查看）
' show memory			查看内存利用率（在#模式下查看）				
' show temperature		查看设备温度（在#模式下查看）
' show fan			查看设备风扇（在#模式下查看）
' show power			查看设备电源（在#模式下查看）
' show logging 			查看系统和告警日志
' show interfaces status  	查看物理端口状态（在#模式下查看）
' show ip interface brief	查看接口IP的UP状态（在#模式下查看）
' show ip route			查看路由表（在#模式下查看）
' show vlan			查看vlan（在#模式下查看）
' show arp			查看ARP表（在#模式下查看）
' show mac    			查看MAC表（在#模式下查看）
' show run			查看当前配置（在#模式下查看）

 自动巡检教程

一、下载vbs脚本，如果下载不了，可以按以下步骤操作，制作VBS文件：

1、将生成的脚本，复制到txt文本内：
2、将文本另存为.vbs文件：

二、打开CRT调试软件，登陆设备：

1、在底下新建按钮：
2、选“运行脚本”--选择vbs文件--按钮命名--确定
3、运行脚本

电脑添加路由
启用
路由类型  临时添加(重启电脑失效) 永久添加(需delete删除，用”delete“替换”add“) 网段或地址: 子网掩码: 下一跳地址:
电脑添加地址
IP固定地址  网卡名称(英文): IP地址: 子网掩码: 网关地址:
IP自动获取  网卡名称(英文): DNS 1:
路由常用配置
拨号上网
启用
宽带账号: 宽带密码: Dialer: WAN口: 内网口: 内网IP: 掩码: ACL编号: 上网网段: 所有网段
固定上网
启用
外网端口: 外网口IP: 掩码: 网关: 内网端口: 内网口IP: 掩码: ACL编号: 上网网段: 所有网段
端口映射
启用
固定IP上网接口: 协议: TCP UDP ICMP 内部IP: 外部端口: 内部端口:
DHCP服务
启用
地址池名: 网段: 掩码  : 网关: 主DNS: 备DNS:
排除范围: 至 : 租期/天: vlan接口调用:
DHCP Snooping
启用
信任端口:  千兆 百兆 万兆 / /
DHCP Relay
启用 DHCP中继 (路由器的DHCP配置参考“DHCP服务”)
与交换机相连的DHCP路由器IP: 
与 DHCP 路由器互联 VLAN: 
交换机IP (与DHCP路由器同网段): 掩码:
与DHCP路由器互联VLAN:  百兆 千兆 万兆 / /
需要自动获取IP的VLAN: VLAN IP: 掩码:
需要自动获取IP的VLAN: VLAN IP: 掩码:
回程路由: 掩码:
回程路由: 掩码:

Telnet-SSH-WEB管理
启用
管理VLAN:  管理IP:  掩码: 
网段 网关 :  用户名:  密码:  （密码有复杂度需求的话，配10位大小写+符号）
接PC管理网口:  千兆 百兆 万兆 / /
交换机 上联口:  千兆 百兆 万兆 / /

基础命令

说明	华为	H3C	思科	锐捷
补全命令	按Tab键	按Tab键	按Tab键	按Tab键
查看配置命令	display	display	show	show
进入配置模式	system-view	system-view	先enable 再config terminal	先enable 再config terminal
退回上级	quit	quit	exit	exit
直接返回第1级视图	return	return	end	end
取消某些配置	undo	undo	no	no
关闭接口	shutdown	shutdown	shutdown	shutdown
开启接口	undo shutdown	undo shutdown	no shutdown	no shutdown
保存配置	save	save	write	write
删除配置	reset saved-configuration	reset saved-configuration	erasestartup-config	delete config.text 或del config.text
重启设备	reboot	reboot	reload	reload
删除文件	delete	delete	delete	delete
设备命名	sysname	sysname	hostname	hostname
查看当前配置	display current-configuration	display current-configuration	show running-config	show running-config
查看已保存配置	display saved-configuration	display saved-configuration	show startup-config	show startup-config
查看路由表	display ip routing-table	display ip routing-table	show ip route	show ip route
查看ARP表	display arp	display arp	show arp	show arp
查看MAC表	display mac-address	display mac-address	show mac address-table	show mac

交换机常用命令

说明	华为	H3C	思科	锐捷
创建VLAN	vlan XX	vlan XX	vlan XX	vlan XX
查看VLAN	display vlan XX	display vlan XX	show vlan XX	show vlan XX
删除VLAN	undo vlan	undo vlan	no vlan	no vlan
进入VLAN接口视图	interface vlan XX	interface vlan XX	interface vlan XX	interface vlan XX
配置IP地址	ip add X.X.X.X Y.Y.Y.Y	ip add X.X.X.X Y.Y.Y.Y	ip add X.X.X.X Y.Y.Y.Y	ip add X.X.X.X Y.Y.Y.Y
配置接口为access	port link-type access	port link-type access	switchport mode access	switchport mode access
批量配置接口	port-group group-member G0/0/1 to G0/0/5	int range G1/0/1 to G1/0/5	int range fastEthernet0/x-x	int range fastEthernet0/x-x
接口加入VLAN	port default vlan XX	port access vlan XX	switchport access vlan XX	switchport access vlan XX
配置接口为trunk	port link-type trunk	port link-type trunk	switchport mode trunk	switchport mode trunk
允许xx vlan通过	port trunk allow-pass vlan xx	port trunk permit vlan xx	switchport trunk allowed vlan xx	switchport trunk allowed vlan xx
配置接口双工	duplex(half|full lauto)	duplex(half|full lauto)	duplex(half|full lauto)	duplex(half|full lauto)
配置接口速率	speed (100|1000)	speed (100|1000)	speed (100|1000)	speed (100|1000)
转为二层口	portswitch	port link-mode bridge	switchport	switchport
开启接口三层功能	undo portswitch	port link-mode route	no switchport	no switchport
开启STP	stp enable	stp global enable	默认开启	spanning-tree
改为快速生成树	stp mode rstp	stp mode rstp	spanning-tree mode rapid-pvst	spanning-tree mode rstp
配置STP优先级	stp priority (0|4096|xxxx)	stp priority (0|4096|xxxx)	spanning-tree vlan XX priority (0|4096|xxxx)	spanning-tree priority(0|4096|xxxx)
配置边缘端口	stp edged-port enable	stp edged-port	spanning-tree portfast	spanning-tree portfast
查看生成树状态	display stp brief	display stp brief	show spanning-tree summary	show spanning-tree summary
创建端口聚合组	interface eth-trunk 1	int Bridge-Aggregation 1	interface port-channel 1	int aggregateport 1
配置为lacp模式	mode lacp	link-aggregation mode dynamic	接口下channel-group 1 mode active	接口下port-group 1 mode active
接口下加入聚合组	eth-trunk 1	port link-aggregation group 1	channel-group 1 mode active	port-group 1 mode active
配置聚合口为acc或trunk	参考普通接口配置	参考普通接口配置	参考普通接口配置	参考普通接口配置
查看聚合组	display eth-trunk	display link-aggregation verbose Bridge-Aggregation	show etherchannel summary	show aggregatePort summary
创建高级ACL	acl 3000 (3000-3999)	acl advanced 3000 (3000-3999)	不需要先创建(100-199)	不需要先创建(100-199)
配置规则	rule 5 permit tcp source 192.168.1.0 0.0.0.255 destination 192.168.2.2 0.0.0.0 destination-port eq 80	rule 5 permit tcp source 192.168.1.0 0.0.0.255 destination 192.168.2.2 0.0.0.0 destination-port eq 80	access-list 100 permit tcp 192.168.1.0 0.0.0.255 192.168.2.2 0.0.0.0 eq 80	access-list 100 permit tcp 192.168.1.0 0.0.0.255 192.168.2.2 0.0.0.0 eq 80
接口应用ACL	traffic-filter inbound acl 3000	packet-filter 3000 inbound	ip access-group 100 in	ip access-group 100 in
查看ACL	display acl all	display acl all	show access-lists	show access-lists

路由器常用命令

说明	华为	H3C	思科	锐捷
配置默认路由	ip route-static 0.0.0.0 0.0.0.0 192.168.1.254	ip route-static 0.0.0.0 0.0.0.0 192.168.1.254	ip route 0.0.0.0 0.0.0.0 192.168.1.254	ip route 0.0.0.0 0.0.0.0 192.168.1.254
配置静态路由	ip route-static 192.168.2.0 255.255.255.0 10.1.1.1	ip route-static 192.168.2.0 255.255.255.0 10.1.1.1	ip route 192.168.2.0 0.0.0.0 10.1.1.1	ip route 192.168.2.0 0.0.0.0 10.1.1.1
配置基础ACL	acl 2000	acl basic 2000	不需要先创建	不需要先创建
允许上网的网段	rule 5 permit source 192.168.0.0 0.0.255.255	rule 5 permit source 192.168.0.0 0.0.255.255	access-list 1 permit 192.168.0.0 0.0.255.255	access-list 1 permit 192.168.0.0 0.0.255.255
配置NAT	外网口nat outbound 2000	外网口nat outbound 2000	内网口ip nat inside /内网口ip nat outside/全局ip nat inside source list 1 interface 外网口 overload	内网口ip nat inside /内网口ip nat outside/全局ip nat inside source list 1 interface 外网口 overload
端口映射	外网口nat server protocol tcp global current-interface 8080 inside 172.16.1.1 80	外网口nat server protocol tcp global current-interface 8080 inside 172.16.1.1 80	全局ip nat inside source static tcp 192.168.1.1 8080 120.1.1.1 80	全局ip nat inside source static tcp 192.168.1.1 8080 120.1.1.1 80
开启DHCP服务	dhcp enable	dhcp enable	service dhcp	service dhcp
配置DHCP 地址池	ip pool dhcp test	dhcp server ip-pool test	ip dhcp pool test	ip dhcp pool test
分配网段	network 192.168.1.0 mask 255.255.255.0	network 192.168.1.0 24	network 192.168.1.0 /24	network 192.168.1.0 255.255.255.0
配置网关	gateway-list 192.168.1.254	gateway-list 192.168.1.254	default-router 192.168.1.254	default-router 192.168.1.254
配置DNS	dns-list 8.8.8.8	dns-list 8.8.8.8	dns-server 8.8.8.8	dns-server 8.8.8.8

常用巡检命令

说明	华为	H3C	思科	锐捷
巡检视图/模式	用户模式<>	用户模式<>	特权模式#	特权模式#
设置命令不分页显示	进入vty 和console口 配置 screen-length 0	screen-length disable	terminal length 0	terminal length 0
显示当前时间	dis clock	dis clock	show clock	terminal length 0
查看设备序列号	dis device manuinfo	dis device manuinfo	show version 有些设备可显示序列号	show clock
查看设备版本	dis version	dis version	show version	show manuinfo
查看设备信息	dis device	dis device	\	show version
查看CPU利用率	dis cpu-usage	dis cpu	show processes cpu	show cpu
查看内存利用率	dis memory-usage	dis memory	show processes mem	show memory
查看设备温度	dis environment	dis environment	show environment all	show temperature
查看风扇状态	dis fan	dis fan	show environment all	show fan
查看电源状态	dis power	dis power	show environment all	show power
查看系统和告警日志	dis logbuffer	dis logbuffer	show logging	show logging
查看物理端口状态	dis int bri	dis int bri	show interfaces status	show interfaces status
查看三层接口状态	dis ip int bri	dis ip int bri	show ip interface brief	show ip interface brief
查看路由表	display ip routing-table	display ip routing-table	show ip route	show ip route
查看vlan	dis vlan	dis vlan	show vlan	show vlan
查看ARP表	dis arp	dis arp	show arp	show arp
查看MAC表	dis mac-address	dis mac-address	show mac address-table	show mac
查看当前配置	dis curr	dis curr	show run	show run

路由与DHCP